| Power supply |
| Rated voltage |
3-phase 380…460V +/- 15% - 1-phase 200…240V +/- 15% |
| Input frequency |
44….67 Hz |
| EMC filter |
Integrated for 2. environment |
|
| Output |
| Output voltage |
0………V-input |
| Output frequency |
0.5………650 Hz |
| Resolution of output frequency |
0,01 Hz |
| Overload capability |
150% - 60 sec. / 10 Min |
|
| Control-Mode |
| PWM control-modes |
V/Hz - Mode |
| PWM frequency |
0,8.....6 kHz |
| V/Hz characteristic |
Linear, quadratic, and user-programmable curve |
| Starting torque |
100% rated torque at 1 Hz |
| DC-Brake |
Freq. threshold, duration and intensity programmable – DC injection |
| Brake chopper |
Integrated chopper transistor |
|
| Display |
| 7 Segment LED display -4- digit |
For programming and visualization of different operating parameters |
|
| I/O Channels, control functions |
| Inverter control - Start/Stop |
To configure: terminals / operation panel / serial link |
| Digital control inputs |
4 digital inputs (HIGH/LOW configurable) |
| Speed reference signal |
Potentiometer, analogue input (terminals 0...10V, (0)4...20 mA), operating panel keys, serial
link
|
| Reference analogue channels |
1 Analogue channels 0…10V, (0)4....20 mA |
| Analogue outputs |
1 analogue output channel programmable in gain, different functions to assign (0…10V) |
| Digitale outputs |
1 digital output (OC, different functions to assign) |
| Relays output |
1 switchover contact 3 A 230 V (programmable for different functions) |
| Interface |
Serial link (MODBUS – ASCI/RTU) |
| Special function - control options |
Jog mode, 12V / 50 mA auxiliary power supply on terminals PI-control Fixed frequency control,
programmable cycling frequency sequence AUTORESET/RESTART function
|
|
| Protection functions, incl. fault memory |
| Electrical protection functions |
Overvoltage, Undervoltage Overcurrent, Overload, Motor-Overload, Output-short Analogue reference
interruption
|
| Thermal protection functions |
Heatsink overtemperature |
|
| Optionals |
| Operating panel |
Remote keypad |
| Brake resistors |
Braking resistors for heavy duty operation |
| Filter / chokes |
PFC chokes – dv/dt limiting output filter - sinusfilter |
| Parameter copy stick |
USB Stick with parameter dublication function |
| PC-Link Software (via MODBUS) |
Special tool for programming, control and diagnostic (parameter set memory) |
| Safety |
STO (Q2 only) |
|
| Environmental conditions |
| Protection |
IP21 |
| Operating temperature |
-10……+40 °C |
| Humidity |
Max. 90 % not condensing, no corrosion |
| Elavation |
1000 m - 1% derating / 100m above |
| Vibration |
Max. 0,5 g |
|
| Power range |
| V/Hz |
230V: 0,2…2,2 kW 400V: 0.2…5,5 kW |
|
| Standards |
| EMC |
EN61800-3(2004) |
| Safety |
EN61800-5-1 2003 |
|
